HOW TO ENJOY YOUR INFLATABLE FROM JET CREATIONS DURING COLD WEATHER
 |
1. Jet Creations monitor and control production at all times, plus we have been making inflatables since 1970 in Taiwan (aka Ilha Formosa) 2. Vinyls and Parts: there are many different varieties and grades, although they might look the same to you. 3. With Jet Creations, you get what you paid for, we are not sure you are ripped off by other maker. Thus, this guide only best applied to products offered by Jet Creations Inc. |
|
1. Before opening the package and inflate the product, please make sure to place it at room temperature (67-72°F / 19-22°C) for at least 2 HOURS Purpose: WARM UP and SOFTEN the vinyl, avoid CRACKs 2. The inflatable product can be used anywhere indoor, as long as the temperature is not too cold and cause the vinyl to harden |
 |
1. Fully inflate your inflatable INDOOR. DO NOT POP or try to make the inflatable hard or remove wrinkles 2. Aiir volume decreases when temperature drops. Therefore you will notice the product shrinks when going outside. 3. Fill the product with more air OUTSIDE to full again. The product is now safe to display outside. 4. Make sure to loose some air before bringing the product back indoor, to prevent overinflation due to air expansion. |
 |
IMPORTANT: To ensure no air leaks please make sure the valve cap and check valve are firmly seated. |
 |
HOW COLD IS TOO COLD? When the product turns harden and losing softness, the vinyl will become easy to crack and losing air. This is the time to move the inflatable indoor immediately. Or please contact us for more information. |